WECL Distribution FLUKE Hong Kong & Macau Distributor Fluke Fluke Networks Hong Kong &  Macau Distributor
 
  Home > Products > Cable Network Testers > Cable Verification > OneTouch™ AT Network Assistant
 
 
Products
> Thermal Imagers
  ● Expert Series
      > TiX1000
      > TiX660
      > TiX640
      > TiX560
      > TiX520
  ● Professional Series
      > Ti400
      > Ti300
      > Ti200
  ● Performance Series
      > Ti32
      > Ti29
      > Ti27
      > Ti125
      > Ti110
      > Ti105
      > Ti100
      > Ti95
      > Ti90
> Fluke Connect™
> Visual IR Thermometers
      > VT04
      > VT04A
      > VT02
> Power Quality Tools
      > 435II
> Vibration Testers
      > 805
      > 810
> Cable Network Testers
      > Cable Verfication
      > Cable Qualification
      > Cable Certification
> IAQ
      > 971
      > 975
      > 975V
> Battery Analyzers
      > BT508
      > BT510
      > BT520
      > BT521
> Others
      > Digital Multimeters
      > Clamp Meters
      > 975
      > 975V
 
 
OneTouch™ AT Network Assistant Contact us for more details
 
FLUKE optifiber
FLUKE optifiber
FLUKE optifiber
FLUKE optifiber
temp-thumb
temp-thumb
temp-thumb
temp-thumb
Features

Integrated Ethernet tester for copper, fiber optic and Wi-Fi

    The OneTouch AT incorporates two 10/100/1000 Mbps RJ-45 Ethernet test ports, two 100/1000 Mbps SFP fiber optic transceiver ports and an internal 802.11 a/b/g/n dual band radio. Simultaneously test wired Ethernet and wireless Wi-Fi networks (including 802.11ac). Easily compare performance with side-by-side test results.



Wired network analysis

    Automated discovery of copper and fiber-connected devices and key device attributes. Sort by attributes to obtain multiple views into the wired network and to solve problems. Select from among thirteen different sorts. For example, sort by IPv4 or IPv6 address to identify used and available addresses. You can sort by switch name/slot/port to understand where on the network devices are connected or sort by discovered problems to quickly identify potential issues. Additional discovery-assisted analysis tools aid with troubleshooting and profile creation. Wired analysis tools include add test, port scan, path analysis, multiport stats, browse and telnet/SSH.






Wi-Fi network analysis

Automated discovery of Wi-Fi devices and key device attributes. Sort by attributes to obtain multiple views into the wireless network and to solve problems. Select from among seventeen context-relative sorts. For example, sort by signal strength to troubleshoot Wi-Fi coverage issues. Sort by MAC manufacturer to discover Wi-Fi devices by type and to understand how they are connected relative to SSID, AP and channel. Sort by channel to identify channel spacing problems. Sort by authorization status to find potential security violations. Additional discovery-assisted analysis tools aid with troubleshooting and security enforcement. Wi-Fi analysis tools include name, authorization, connect, locate and capture.






Configurable profiles for standardized testing


Use the intuitive touch interface and the Setup Wizard to create test profiles, where a profile is a set of tests tailored to your network, services, and applications. Create simple profiles with only a few tests or advanced profiles consisting of dozens of tests. You can build profiles to accommodate different types of users, devices, locations or technologies. Once created, profiles can be saved for quick and easy reuse later. Create a library of standardized profiles to elevate the troubleshooting know-how of network support staff. Share profiles with other OneTouch AT users. Use profiles to establish best practices for consistent, faster, more productive troubleshooting and network acceptance testing.

Simplify profile creation while learning about the tester's capabilities by running the Setup Wizard. The wizard simplifies profile creation with step-by-step guided instructions, yes/no prompts, on-screen help and graphical progress indicators. Experienced users can bypass the wizard if desired.


Automated one-touch troubleshooting



One Hour of Testing Time in Just One Minute

Test everything defined in a profile automatically with the one-touch AutoTest. The AutoTest progresses from the physical layer of the network, through the wired and wireless infrastructure, to network services and user-defined applications tests. Clear pass/fail and warning indicators highlight potential problems. A top-level pass/fail indicator provides the overall AutoTest status at a glance.


Client view of network performance



Most network trouble tickets start where a client device is connected to the network—where the device could be a PC, tablet, smart phone, IP phone, printer, POS terminal, industrial equipment controller or a medical imager. Troubleshoot common issues—or prove that the network is not the cause—by emulating the client device and measuring network performance.


Infrastructure to application testing


The cause of a network problem can be elusive. Identify the root cause of a problem by measuring and analyzing the performance of the critical network elements: the network cabling, the delivery of Power over Ethernet (PoE), the connection to the nearest switch, the connection to the nearest access point and the performance of key network services and server-based applications.
   
 


Performance testing


Measure wired and Wi-Fi end-to-end path performance to a peer or a reflector to validate and document link readiness and SLA compliance. Performance metrics include throughput rate, frame loss, jitter and latency. Test to a remote peer for upstream and downstream results. Test to a remote reflector for roundtrip results. Test between the wired and Wi-Fi interfaces on the same OneTouch for remote-less upstream and downstream results. Test wired performance at rates up to 1 Gbps and Wi-Fi performance at rates up to 100 Mbps. Define the duration, frame size, DSCP value and pass/fail loss limit. Save the results as a report to document performance.




Network services testing


OnTest DHCP server responsiveness. Identify the wired and Wi-Fi DHCP servers and view the offer and acceptance timing and lease information. Test DNS server responsiveness. Identify the wired and Wi-Fi DNS servers and view the DNS lookup time.

Network application testing


Determine if a server-based application is the root cause of a reported problem by measuring availability and responsiveness metrics. Add to the AutoTest profile the performance test appropriate for the application: ping (ICMP), connect (TCP), web (HTTP), file (FTP), multicast (IGMP), video (RTSP) or email (SMTP). Each test is graphically represented on the OneTouch AT home page as an icon. After running the AutoTest, touch a test icon on the home page to get a detailed breakdown of application performance including DNS lookup time, server response time and data rate.

The test results are presented side-by-side for easy wired/Wi-Fi and IPv4/IPv6 performance comparisons. A few examples: ping your WLAN controller, connect to port 2000 on your VoIP call manager, download a page of an application with a web interface, upload or download a file from a server, subscribe to a multicast group, access video content from an on-demand streaming video server or email a text message to your mobile phone.


Local, intranet and internet performance


Understand the performance of network services and server-based applications wherever they are hosted: locally in the datacenter, on a corporate intranet server or on a server reached via the public internet. Create location centric AutoTest profiles by grouping together co-located services and applications. Measure service levels to the different groups to quickly spot problems.


Remote management


Collaborate with peers, consultants, integrators and vendors more effectively by sharing packet captures, screen shots and AutoTest reports. Control the user interface remotely and manage files remotely via the OneTouch AT management port and a web browser. Attach a web cam to the OneTouch AT to share a view of the test environment.


Cloud-based trending


The Trending feature automatically and repeatedly uploads AutoTest results to the cloud for additional analysis. Control the number of AutoTest results uploaded by setting the trending duration and interval. Trending runs automatically once launched, untethering the user from the tester. The user does not need to be present to gather test results; simply launch Trending and leave.Trend results for up to 1 week, or until manually stopped. Long duration testing is invaluable when trying to troubleshoot sporadic, intermittent problems that frequently occur when network support staff is away.


Cloud analytics


Open a OneTouch AT Cloud Service account to view and analyze AutoTest results uploaded via the Trending feature.Correlate network events by viewing multiple test results simultaneously in side-by-side charts.All the test results uploaded during a single Trending session are available for analysis.The number of tests is defined by the complexity of your AutoTest profile and the number of results is defined by the Trending duration and interval.Select one or more of the tests within the trending session to analyze the results.The Cloud Service plots sequential results on a single color-coded chart to simplify analysis over time.Charting makes it easy to see performance irregularities.Zoom permits an even more detailed analysis of the sub-processes that comprise each individual test.

Access the Cloud Service over the web at anytime from anywhere using a web-connected smart device with a web browser.View and analyze results when and where convenient using a PC or smart device.

Basic Cloud Service is free and includes long-term storage of a single trending session.Gold Cloud Service offers long-term storage of multiple trending sessions.Gold Cloud Service is included with Gold Support.


Remote control and file access


Use the built-in RJ-45 management port or optional USB Wi-Fi adapter to remotely control the OneTouch AT and access saved files.Any action that can be performed directly on the OneTouch AT using the touch screen can be performed remotely using a PC, laptop, tablet or smart phone.Manage the OneTouch AT remotely when and where convenient using a device at hand.Minimize the time, expense and inconvenience of traveling to the client location where the problem was reported.Webcam support enables live, remote viewing of the physical environment near the tester.

Remotely control the OneTouch AT and access saved files from the Cloud Service web application.Increase productivity by remotely managing the tester and viewing trended AutoTest results all from a single location. Remote management via the Cloud Service web application also allows traversal of NAT devices, which is very advantageous when troubleshooting outside the office.


Problem avoidance and performance optimization



Cloud trending and analytics let you use the OneTouch AT for proactive problem avoidance and performance optimization.Set a long trending duration – up to one week – and use Cloud Service analytics to identify potential vulnerabilities and performance bottlenecks.In this use model, the OneTouch AT serves as a 24/7 portable network probe and the Cloud Service as the analytics engine.Identify and correct potential network, service or application vulnerabilities before they become problems that adversely impact users. Identify performance bottlenecks and reconfigure the network to optimize end user response time.

The OneTouch AT excels at both “firefighting” - reactive troubleshooting of both persistent and intermittent problems – and daily network management - for proactively avoiding problems and optimizing performance.


Wired network discovery and analysis


Automatically discover copper and fiber-connected devices and key device properties. Select from among fourteen different sorts to obtain different views into the wired network. For example, sort by IPv4 or IPv6 address to identify used and available addresses. Or sort by switch name/slot/port to understand where on the network devices are connected.Sort by discovered problems to quickly identify potential issues.Additional discovery-assisted analysis tools aid with troubleshooting and profile creation.For example, the Multiport Statistics tool provides visibility into switch, router and AP port statistics including speed, duplex, slot, port, VLANs, host count, utilization, discards and errors.The Devices on Port tool provides visibility into the devices connected to an individual switch port.The Path Analysis tool provides a layer 2 and 3 trace route from the OneTouch AT to a target device including time to each hop and SNMP switch and router port statistics.

   


Wi-Fi network discovery and analysis


Automatically discover Wi-Fi devices and key device properties. Select from among nineteen context-relative sorts to obtain different views into the wireless network. For example, sort by signal strength to troubleshoot Wi-Fi coverage issues.Sort by MAC manufacturer to discover Wi-Fi devices by type and to understand how they are connected relative to SSID, AP and channel.Sort by channel to identify channel spacing and usage problems.Sort by authorization status to find potential security violations.Additional discovery-assisted analysis tools aid with troubleshooting and security enforcement.If a Wi-Fi device is also discovered via Wired Analysis, the Cross Link feature enables one-button toggling between wired and Wi-Fi analysis views.

   


End-to-end path performance measurement


Ensure that newly installed or upgraded wired and Wi-Fi networks meet SLA objectives and are ready for new high-bandwidth applications by measuring end-to-end path performance. Measure throughput, frame loss, latency and jitter between a local OneTouch AT and a remote OneTouch AT peer or a remote LinkRunner reflector. A remote peer provides upstream and downstream results while a remote reflector yields round trip results. Measure performance at rates up to 1 Gbps on copper and fiber networks and 120 Mbps on Wi-Fi networks. A special use model exists that enables testing from the OneTouch AT wired interface to the Wi-Fi interface on the same instrument for testing without a remote.



VoIP analysis


Connect the OneTouch AT inline between an IP phone and the network for real-time troubleshooting and analysis. The VoIP analysis test reveals issues related to PoE, DHCP, TFTP, SIP, and SCCP. The test provides visibility into unencrypted SIP and SCCP traffic to debug VoIP phone problems and quantify the quality of a VoIP call. Simultaneous capture of the VoIP conversation is optional.


Packet capture


Capture wired, Wi-Fi, VoIP and AutoTest traffic when a packet-level view is required to solve a complex network or application issue. Filter the traffic to capture what is most important. Export the capture file to a PC for decoding and analysis using protocol analysis software. Capture wired traffic on a single port, on two ports aggregated, or inline between a client device and the network. Inline capture avoids the complexity, time and cost associated with standalone taps or configuring switch mirror ports. Capture Wi-Fi traffic by channel and mode (20 MHz or 40 MHz+).

   
 


Additional OneTouch AT features


    Copper and Fiber Optic Cable Testing
    Troubleshoot cable performance quickly by measuring twisted pair cable wiremap and length. Use cable identifiers and IntelliTone™ toning to locate and identify cables. Measure the optical power received through fiber optic links. Verify the cleanliness of fiber optic connections by viewing connector end faces with the optional FiberInspector™ USB video probe.

    PoE Testing
    Verify the successful delivery of PoE with the TruePower™ load test.Emulate an 802.3at (PoE+) class 1-4 powered device and measure power up to 25.5 watts.See the requested and received PoE class, the pair used and the PSE type. Measure PoE voltage unloaded and under load.

    Wired and Wi-Fi Connectivity Testing
    Understand how a client device connects to the wired infrastructure by testing link negotiation, identifying the nearest switch, and monitoring key switch port statistics.Understanding of how a client device connects to the Wi-Fi infrastructure by testing the link between the client and the nearest access point, identifying the AP name, channel and security type, observing the authentication and association process, and monitoring key AP and network statistics, including roaming details by AP.

    Troubleshoot your IPv6 Network
    Easily compare and contrast IPv4 and IPv6 wired and wireless network performance by viewing test results side-by-side.

    Save Test Results
    Save the test results in a PDF report to share with colleagues or outside parties. A report serves as trouble ticket documentation, as a record of historical performance for benchmarking or as a certification report after new infrastructure deployment and turn up. Define which test results to include in the report: settings, AutoTest, wired analysis, Wi-Fi analysis or VoIP.

    Purpose-built for Field Testing
    The OneTouch AT is engineered specifically for network support professionals on the go. Useful test and management tools include a web browser, Telnet/SSH client, cable toner, webcam support and optional fiber optic connector inspection camera. The durable platform provides years of reliable operation in tough environments.

Versiv™ platform

Expand testing capabilities by adding new modules to the Versiv platform as testing needs evolve.Available modules include DSX CableAnalyzer™, CertiFiber® Pro OLTS and OptiFiber® Pro OTDR.


OneTouch AT product family comparison


Summary 1T-1000 1T-1500 1T-2000 1T-3000
Dual 10/100/1000 Mbps RJ45 ports
Dual 100/1000 Mbps fiber optic SFP ports
10/100 RJ45 management port,
802.11 USB management port1
Copper and fiber testing, wired analysis and wired tools (port scan, path analysis, multiport stats, devices on a port)
802.11 a/b/g/n 2.4/5 GHz Wi-Fi adapter
802.11ac discovery, connect and locate
Wi-Fi testing, Wi-Fi analysis and Wi-Fi tools (name, authorize, connect, locate)
Setup Wizard
Cloud tools (trending, claim unit, unit name, remote access)
Testing tools (browser, TELNET/SSH, toner2, flash port, FiberInspector/Webcam3, performance peer)
VoIP analysis (inline copper and fiber)
Service tests (DHCP, DNS, ICMP, TCP)
(wired)

(wired)

(wired and Wi-Fi)

(wired and Wi-Fi)
Packet capture (single port, dual port, inline, VoIP, AutoTest, Wi-Fi)
(wired)

(wired and Wi-Fi)
Advanced tests (HTTP, FTP, IGMP, RTSP, SMTP, Performance4)
(wired)

(wired)
Standard accessories (AC adapter, wiremap adapter #1, RJ45 patch cable and coupler, getting started guide, users manual, carrying strap and case)
Capture and additional testing accessories (SD card, USB SD card reader for a PC, USB flash drive, wiremap adapters #2 - #6, two SX fiber transceivers)
Wi-Fi accessories (external directional antenna with mounting clip)

1Wi-Fi management port requires an 802.11 USB adapter (not included).
2Toning includes analog and IntelliTone™ tone generation. A compatible tone probe is required (not included).
3Requires a FiberInspector™ USB video microscope or a USB webcam (not included) .
4Performance testing includes measurement of path performance end-to-end from a local tester (the OneTouch AT) to a remote peer (a second OneTouch AT) or a remote reflector (a LinkRunnerTM AT 2000 or equivalent). The remote tester is not included in these models (kits are available that do include these remotes).


Specifications

General
Dimensions (with module and battery installed) 10.3 in x 5.3 in x 2.9 in (26.2 cm x 13.5 cm x 7.3 cm)
Weight (with module and battery installed) 3.5 lb (1.6 kg)
Display 5.7 in (14.5 cm) LCD with projected capacitance touchscreen, 480 x 640 pixels
AC adapter Input: 100-240 Vac, 50-60 Hz, 1.0 A
Output: +15 Vdc, 2.0 A
Battery type Lithium ion battery pack, 7.2 V
Battery life Approximately 3-4 hours depending on type of usage
4 hours to charge from 10% capacity to 90% capacity with the unit powered off
Memory Internal: 2 GB shared between system and user files
SD card: 4/8 GB, brand and model selected for optimal performance
USB 2.0 type A port: for use with USB mass storage devices
Wired Network Interface
Network analysis ports Two RJ-45 10/100/1000BASE-T Ethernet
Two Small Form-factor Pluggable (SFP) 100BASE-FX/1000BASE-X Ethernet
Management port One RJ-45 10/100BASE-T Ethernet
One USB 802.11 (requires optional adapter)
Supported network standards IEEE 10BASE-T, IEEE 100BASE-T, IEEE 1000BASE-T, IEEE 100BASE-FX, IEEE 1000BASE-X
RFCs and standard MIBs used 1213, 1231, 1239, 1285, 1493, 1512, 1513, 1643, 1757, 1759, 2021, 2108, 2115, 2127, 2233, 2495, 2515, 2558, 2618, 2737, 2790, 2819, 3592, 3895, 3896, 4188, 4502.
Not for connection to telephone networks The OneTouch AT analyzer is NOT designed for connection to a telephone network.
The OneTouch AT analyzer is NOT designed for connection to an ISDN line.
Do not connect to a telephone network or ISDN line except through a regulatory agency compliant computer network modem device.
Wi-Fi Network Interface
Wi-Fi connectivity 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac (at 802.11n rates or lower)
Data rate 802.11a: 6/9/12/24/36/48/54 Mbps
802.11b: 1/2/5.5/11 Mbps
802.11g: 6/9/12/24/36/48/54 Mbps
802.11n (20 MHz): MCS0-23, up to 216 Mbps
802.11n (40 MHz): MCS0-23, up to 450 Mbps
Operating frequency 2.412 ~ 2.484 GHz (Industrial Scientific Medical Band)
5.170 ~ 5.825 GHz
Security 64/128-Bit WEP Key, WPA/WPA2 personal, WPA/WPA2 enterprise, 802.1X
Transmit output power (±2 dBm tolerance, maximum power will vary by channel and according to individual country regulations) 802.11a: 12 dBm ± 2 dBm @ 54 Mbps
802.11b: 17 dBm ± 2 dBm @ 11 Mbps
802.11g: 16 dBm ± 2 dBm @ 54 Mbps
802.11gn HT20: 16 dBm ± 2 dBm @ MCS0
802.11gn HT20: 15 dBm ± 2 dBm @ MCS7
802.11gn HT40: 15 dBm ± 2 dBm @ MCS0
802.11gn HT40: 14 dBm ± 2 dBm @ MCS7
802.11an HT20: 15 dBm ± 2 dBm @ MCS0
802.11an HT20: 12 dBm ± 2 dBm @ MCS7
802.11an HT40: 14 dBm ± 2 dBm @ MCS0
802.11an HT40: 11 dBm ± 2 dBm @ MCS7
Receive sensitivity (±2 dBm tolerance) 802.11a: -81 dBm ± 2 dBm @ 54 Mbps
802.11b: -92 dBm ± 2 dBm @ 11 Mbps
802.11g: -82 dBm ± 2 dBm @ 54 Mbps
802.11gn HT20: -79 dBm ± 2 dBm @ MCS7
802.11gn HT40: -76 dBm ± 2 dBm @ MCS7
802.11an HT20: -78 dBm ± 2 dBm @ MCS7
802.11an HT40: -74 dBm ± 2 dBm @ MCS7
Power consumption (maximum) Transmit: 810 mA
Receive: 350 mA
Wi-Fi Antennas
Internal Wi-Fi antennas Three internal 2.4 GHz, 1.1 dBi peak, 5 GHz, 3.2 dBi peak antennas supporting 3x3 MIMO technology
External directional antenna Antenna, frequency range 2.4 - 2.5 and 4.9 - 5.9 GHz.
Minimum gain 5.0 dBi peak in the 2.4 GHz band, and 7.0 dBi peak in the 5 GHz band.
External antenna connector (external antenna port is receive-only, no transmit) Reverse SMA
Environmental and Regulatory
Operating temperature 32°F to 122°F (0°C to 50°C)
Battery charging temperature 32°F to 104°F (0°C to 40°C)
Storage temperature -40°F to 160°F (-40°C to 71°C)
-4°F to 122°F (-20°C to 50°C) for periods longer than 1 week
Operating relative humidity (% RH without condensation) 5% to 45% at 32°F to 122°F (0°C to 50°C)
5% to 75% at 32°F to 104°F (0°C to 40°C)
5% to 95% at 32°F to 86°F (0°C to 30°C)
Shock and vibration Meets the requirements of MIL-PRF-28800F for Class 3 Equipment
Safety CAN/CSA-C22.2 No. 61010-1-04, IEC 61010-1:2001
Operating altitude 13,123 ft (4,000 m), 10,500 ft (3,200 m) with ac adapter
Storage altitude 39,370 ft (12,000 m)
Pollution degree 2
EMC EN 61326-1:2006
Cables
Cable types 100 Ω Unshielded Twisted Pair (UTP) LAN cables.
100 Ω Shielded or Screened Twisted Pair (SeTP) LAN cables.
TIA Category 3, 4, 5, 5e, and 6. ISO Class C, D, E and F.
Cable length measurement Measurable cable lengths are from 3 feet (1 meter) to 656 feet (200 meters).
Accuracy: ± 6 feet (± 2 meters) or 5%, whichever is greater.
Length measurement is based on Nominal Velocity of Propagation (NVP) for CAT 5e cable.
Test Settings
Wired Speed, duplex, PoE, 802.1X, IPv4 address, IPv6 address, MAC address (port A can be changed by the user), VLAN, Wait for Rx Frame
Wi-Fi Band (2.4 and/or 5 GHz), authorization default, scan or connect, SSID, security, IPv4 address, IPv6 address, MAC address (Wi-Fi adapter can be changed by the user), Transmit Probes
Analysis SNMP v1/v2, SNMP v3, Slow Discovery
Cloud Tools
Trending Use (wired port, Wi-Fi port, management port), duration (2 minutes to 1 week),interval (1, 2, 5, 10, 30, 60 minutes), proxy (off/on)
Claim Unit Claim, proxy (off/on)
Unit Name Text string
Cloud Remote On/Off
Network Tests
Receive Rx optical power measurement accuracy varies by transceiver, typically ± 3.0 dB
Power over Ethernet (PoE) Single ended testing:
  • User-defined testing to IEEE 802.3at class 0, 1, 2, 3, 4 without LLDP negation, or 4 with LLDP negotiation
  • The following PSE PoE parameters are measured:
    • Received class
    • PSE type
    • Unloaded voltage(V)
    • Pairs used
    • Loaded voltage(V)
    • Loaded power(W)
Inline testing between PSE and PD devices:
  • PoE Negotiation between PSE and PD
  • The following PoE parameters are measured:
    • Pairs used
    • Voltage(V)
    • Current(mA)
    • Power(W)
Infrastructure Cable, link, PoE, nearest switch, nearest AP, DHCP server, DNS server, gateway
Wired Analysis hosts, access devices, servers, tools (port scan, add test, path analysis, multiport statistics,devices on port, browse, TELNET/SSH), sorts
Discovery protocols supported SNMP v1/v2/v3, CDP, EDP, LLDP, ICMP, ARP, FDP
Wi-Fi Analysis networks, access points, clients, channels, tools (name, authorization, connect, locate, capture), sorts, show active
Services Ping (ICMP), connect (TCP), web (HTTP), file (FTP), multicast (IGMP), video (RTSP), email (SMTP)
Wired Performance (local to remote)
  • Remote type: wired peer (upstream and downstream results, wired reflector (roundtrip results)
  • Compatible peer: OneTouch AT
  • Compatible reflector: LinkRunner Duo/Pro/AT
  • Rate: up to 1 Gbps
  • Loss limit % (pass/fail): 0, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50
  • Duration: 1 s, 2 s, 5 s, 10s , 30 s, 1 m, 2 m, 5 m, 1 h, 6 h, 12 h, 24 h
  • Frame size (byte): 64, 128, 256, 512, 1024, 1280, 1518, RFC 2544 sweep
  • DSCP: user defined
  • Port: user defined
  • Results: actual rate (bps), frames sent, received, lost, latency, jitter
  • Result presentation: table, graph
Wi-Fi Performance (local to remote)
  • Remote type: wired peer (upstream and downstream results, wired reflector (roundtrip results), wired port of the same OneTouch (upstream and downstream results)
  • Compatible peer: OneTouch AT
  • Compatible reflector: LinkRunner Duo/Pro/AT
  • Rate peer/reflector: up to 100 Mbps
  • Rate This OneTouch: up to 20 Mbps
  • Loss limit % (pass/fail): 0, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50
  • Duration: 1 s, 2 s, 5 s, 10s , 30 s, 60 s
  • Frame size (byte): 128 to 1518
  • DSCP: user defined
  • Port: user defined
  • Results: target rate (bps), frames sent, received, lost, loss, actual rate (bps), latency, jitter, out of sequence, ping response, return code, Wi-Fi layer 2 statistics, Wi-Fi layer 1 statistics
Testing Tools
Capture, Wired
  • Connection: Port A, Ports A and B, Inline
  • Filters: MAC, VLAN, IP, Port, IPv6
  • File size (MB): 1, 10, 100, 250, 500, 1000, 2000
  • Frame slice (B): 64, 128, 256, 512, 1024, 1280, 1518, 9600
  • AutoTest: off, on
Capture, Wi-Fi
  • Connection: Wi-Fi
  • Filters: channel, channel mode, device, frame type
  • File size (MB): 1, 10, 100, 250, 500, 1000, 2000
  • Frame slice (B): 64, 128, 256, 512, 1024, 1280, 1518, 9600
  • File format: ClearSight Analyzer, AirMagnet, WireShark, Qualcomm,pcap
  • AutoTest: off, on
VoIP Analysis
  • Inline call analysis
  • Protocols: unencrypted SIP and SCCP
  • Traffic statistics monitoring
  • Call log of protocol and conversation events
  • Call quality measurements (packets, dropped, burst, jitter, MOS, R-factor)
  • PoE measurements
Performance Peer Port number
Browser port (management/wired/Wi-Fi)
Telnet/SSH Username/password (for SSH)
Toner IntelliTone™, analog 400 Hz, analog 1 kHz
Flash switch port 1s, 2s, 3s
FiberInspector™/ Webcam real time, pause, scale (for fiber), save
File Tools
Profiles Save, delete, rename, export, import, load
AP authorization Save, delete, rename, export, import, load
Reports Save, delete, rename, export, import, view
Screens Save, delete, rename, export, import, view
Certifications and Compliance
Conformite Europeene. Conforms to the requirements of the European Union and the European Free Trade Association (EFTA).
Listed by the Canadian Standards Association.
Conforms to relevant Australian standards.


Models

1T-1000
1T-1500  


1T-2000




1T-3000  
1T-3000-C SA  
 
   
 
 
 
 
 
LaserSharp auto focus video
Click to try the CNX system online
Your ROI with FLUKE Thermal Imager
Download FLUKE 2015 Catalogue   Register for FLUKE Ti Thermal Imager Demo
 
     
  435II Power Quality and Energy Analyzer  
Hotline:(852) 3182 0888    |     Fax:(852) 3182 0808     |     Email:cs@wecl.com.hk
 
Solutions
● Electrical
● Building Diagnostics
● Energy Management
● Mechanical
● Network Management
 
Products
● Fluke Connect™
● Thermal Imagers
● Visual IR Thermometers
● Power Quality Tools
● Vibration Testers
● Cable Network Testers
● IAQ
 
Support
● Demonstration
● Application Notes
● Tools
● Videos
 
About Us
 
Contact Us
 
Home